RADARTECH

DUMP1090 Mutability Installation




This part explains how to install DUMP1090 Mutability software.

Before to start the installation, you need the geographic position of the receiver, on decimal degrees.
One method to find the exact location is to use Google Earth.
Start Google Earth, go on Tools tab and click on Option. On Option window, under 3D View tab, go on Show Lat/Long area and tick "Decimal Degrees", then press "OK".

ge1


Zoom in the map as much is necessary to see your position on map. Move the cursor on top of your location and read the coordinates on the down side of the page. Write down the values, they will be inserted into DUMP1090 configuration later.

ge2


Please follow the below steps:

    1.   Open a terminal and run the below command:

sudo bash -c "$(wget -O - https://raw.githubusercontent.com/abcd567a/dump1090/master/install_dump1090_mut_1.15.sh)"

Fig042


    2.   The DUMP1090 Mutability starts.

Fig043


    3.   Once the installation is done, the configurator starts. There is not to much to change, most of the parameters are by default filled, so all you need to do is to press "Enter" key. The only two parameters to be inserted are Latitude and Longitude, pay atention on below steps.

Fig044


Press "Enter".

Fig045


Press "Enter".

Fig046


Press "Enter".

Fig047


Press "Enter".

Fig048


Press "Enter".

ATENTION ON NEXT STEP!



Fig049


Insert Latitude value previously determined and press "Enter".

ATENTION ON NEXT STEP!



Fig050


Insert Longitude value previously determined and press "Enter".

Fig051


Press "Enter".

Fig052


Press "Enter".

Fig053


Press "Enter".

Fig054


Press "Enter".

Fig055


Press "Enter".

Fig056


Press "Enter".

Fig057


Press "Enter".

Fig058


Press "Enter".

Fig059


Press "Enter".

Fig060


Press "Enter".

Fig061


Press "Enter".

Fig062


Press "Enter".

Fig063


Press "Enter".

Fig064


Press "Enter".

Fig065


Press "Enter".

Fig066


Press "Enter".

    3.   The DUMP1090 Mutability installation is complete.
Close the terminal and reboot the device.

Fig067





  Powered by www.duduman.ro